• Post category:StudyBullet-6
  • Reading time:5 mins read


Learn how to design Structured Cabling Systems

What you will learn

Learn the basic concepts of a Structured Cabling System

Understand the components for Cabling Implementations

Identify the tools for Cabling a Building or Datacenter

Learn the fundamentals of Cabling

Description

On this training you will learn the basics of a Structured cabling system, is building or campus cabling infrastructure that consists of a number of standardized smaller elements (hence structured) called subsystems. Structured cabling components include twisted pair and optical cabling, patch panels and patch cables.

Structured cabling is the design and installation of a cabling system that will support multiple hardware uses and be suitable for today’s needs and those of the future. With a correctly installed system, current and future requirements can be met, and hardware that is added in the future will be supported.

Structured cabling design and installation is governed by a set of standards that specify wiring data centers, offices, and apartment buildings for data or voice communications using various kinds of cable, most commonly category 5e (Cat 5e), category 6 (Cat 6), and fiber optic cabling and modular connectors. These standards define how to lay the cabling in various topologies in order to meet the needs of the customer, typically using a central patch panel (which is normally 19-inch rack-mounted), from where each modular connection can be used as needed. Each outlet is then patched into a network switch (normally also rack-mounted) for network use or into an IP or PBX (private branch exchange) telephone system patch panel.

Cabling standards require that all eight conductors in Cat 5e/6/6A cable be connected.


Get Instant Notification of New Courses on our Telegram channel.


IP phone systems can run the telephone and the computer on the same wires, eliminating the need for separate phone wiring.

Regardless of copper cable type (Cat 5e/6/6A), the maximum distance is 90 m for the permanent link installation, plus an allowance for a combined 10 m of patch cords at the ends.

Cat 5e and Cat 6 can both effectively run power over Ethernet (PoE) applications up to 90 m. However, due to greater power dissipation in Cat 5e cable, performance and power efficiency are higher when Cat 6A cabling is used to power and connect to PoE devices

English
language

Content

Introduction

Introduction

Understanding Cabling for LAN and WAN

Understanding Cabling for LAN and WAN

UTP Cabling and Tools for Implementation

UTP Cabling and Tools for Implementation

Understanding UTP Cabling

Understanding UTP Cabling

Cabling Systems Color Codes (EIA/TIA 568A, 568B)

Cabling Systems Color Codes (568A, 568B)

Understanding Patch Panels

Understanding Patch Panels

Punch Down a 110 Block

Punch Down a 110 Block

Category 7 Recommendations

Category 7 Recommendations

Cloud Datacenter Building Structured Cabling

Cloud Datacenter Building Structured Cabling