Prepare your STL Teeth Model File for Printing By make important Changes in the Model using Software called Meshmixer.
☑ Dentists Will Learn How to Prepare The Teeth Model .STL File for the 3D Printer.
Prepare your STL Teeth Model File for Printing By make important Changes in the Model using Software called Meshmixer.
in this Course we will Learn :
1 – Move – Rotate – Change Scale for the Tooth STL Model or Guide.
2 – Cut the Excess Material in the teeth model or the guide.
3 – Close the Holes in your STL Tooth Model.
4 – Make a Teeth Virtual Extraction for STL Model.
5 – Make Hollowing to the Tooth Model and Test Strength.
6 – make a Good Base for your STL Teeth Model.
– you will Learn how to Move the STL Model and Changes its Original Orientation in the X Y Z directions .
– you will Learn also how to Rotate the Teeth Model 180 degree to make any Process easily on the model.
– we will learn how to use many tools like Plane cut tool that we use for cutting all the extra material in the model or the Surgical Guide.
– We will learn How to close the Holes in the model So it could be printed easily without errors.
– We will learn How to make a virtual extraction for the tooth we want in the model By Choosing the tooth and make some instructions to make right Virtual Extraction.
– We will learn also by Hollowing the model we can save 75 % of the material consumed on the printing.
English
Language
Introduction
Move – Rotate – Change Scale for the Tooth STL Model or Guide
2 – Cut the Excess Material in the teeth model or the guide
3 – Close the Holes in your STL Tooth Model
4 – Make a Teeth Virtual Extraction for STL Model.
5 – Make Hollowing to the Tooth Model and Test Strength
6 – make a Good Base for your STL Teeth Model